Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) User Manual
Page 41
21-0421E rev1.1
VeDVR User Guide
33
NOTE: The subject and body text of emails sent by the DVR is in English regardless of the selected DVR language.
To make selections in the Email Notification screen:
1. Use the “◄”, “►”, “▲” and “▼” arrow buttons on the DVR controls or remote control or mouse pointer to high light
the screen selections.
2. Press “EDIT” to change a selection
3. Use “▲”, “▼” to change the selection. Left click the mouse to change the selection.
4. Press “ENTER” to save a selection and return to the Image Menu.
5. After making changes, press Confirm to save the changes or Cancel to not save the changes.
•
Authentication: check to enable User and Password by changing the “×” to a check mark “9”.
•
Enter User and Password
•
Enter Sender Name and Address
•
Enter Email Server
•
Enter Mail receiver
•
Enter Name 1 and Address 1
•
Select Attachment and Interval (JPEG)
Email JPEG Attachments
•
The email function has an option to attach JPEG images to emails that contain camera-specific event information
(i.e. signal loss, motion, view tampering). There is a limit of how many JPEG images can be emailed at the same
time. When multiple emails with attached JPEGs are sent simultaneously, a limit of 4 emails will contain the
attachments.
•
The time between JPEGs can be configured. However, the pre-alarm (pre-recording time) JPEG will not always
be exactly XX seconds prior to the alarm JPEG. Depending on the current bit rate, the DVR may not have video
from XX seconds ago in its buffer, and therefore the Email function can not provide a pre-alarm image from XX
seconds prior to the event.
•
When the DVR is playing back video locally, the pre-alarm JPEG image can not be obtained and the email will only
contain 2 attached JPEG images instead of 3. The same can happen for other reasons (i.e. DVR was too busy at
the time) in about 10% of the cases, i.e. 1 out of 10 Emails will have 2 instead of 3 attachments.
Press Confirm to save changes or Cancel not to save changes and return to the previous menu.
Telnet
For manufacturer’s purposes only.