Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 36)

28 VeDVR User Guide 21-0421E rev1.1
Video Player Playback Operation
Two Channel Play Back example:
At the bottom of the image(s) when a mouse is connected to the DVR, there are controls and information for the File
Video Player.
Using the DVR controls or remote control: (refer to the “Front Panel Indicators and Controls” and “IR Remote
Control” sections)
• Display/Hide the controls/information bar: press “MENU”.
• Turn sound ON/OFF: press “PLAY”.
• Adjust play progress: “◄” (Reverse), “►” (Forward) in a “%” amount.
• Adjust play speed: Normal speed is “1x”. Press “▲” to increase the play speed (2x, 4x, 8x and MAX). Press “▼” to
decrease the play speed (1/2x, 1/4x, 1/8x and “Single – Frame-by-Frame”)
• PLAY/PAUSE: Press “ENTER” to pause/continue playback. If the view is played frame by frame, press “◄”
(Reverse) or “►” (Forward) to play one frame at a time.
• Copy segment: press “EDIT”. Press “EDIT” to stop copying. Press “ESC” to confirm.
• Exit: “ESC”.
• Playback switch: When in 2 channel playback, press “PREV” to switch between main channel and second channel
and back to 2 channel.
• When in Playback pressing the “◄” button at a 30 second interval from the beginning will begin playing the clip
from its beginning again. Pressing the left arrow any where in the clip will reverse the clip at 30 second intervals
until it returns to the beginning.
• Pressing the “◄” button a second time 30 seconds into a clip will transfer the view to a prior clip in the results list or
back to the results list if this was the first clip played or only clip in the list.
• When in Playback pressing the “►” button at a 30 second interval from the ending will move the clip to its end and
stop. Pressing the right arrow less than 30 seconds from the ending will have no effect. The file will continue
playing until it reaches its end. Pressing the right arrow any where in the clip will move the clip at 30 second
intervals until it reaches the end.
• Pressing the “►” button a second time 30 seconds into a clip the file goes to the end of the file briefly and then
begins playing the next file/clip from the results list or back to the results list if this was the last clip played or only
clip in the list.
• When in a single camera playback, press another camera number that recorded at the same time to view that
camera’s view. Press the previous camera’s number to return it. Enter single digits for a 4 or 8 channel DVR. Enter
a “0” before single digit camera channels on a 16 channel DVR.
NOTE: When attempting to go backwards or forwards at 30 second intervals in playback while viewing a file with a
time/DST (Daylight Savings Time) change, it is only possible to speed up or slow down. The 30 second interval
backwards function is not available and attempting to move forwards at 30 second intervals will proceed to the very
end of the file.