Det-Tronics 000499-124 DVR, 16 Camera, 500GB (Guardall) - Manual (Page 55)

21-0421E rev1.1 VeDVR User Guide 47
Select Out: Select the Main Channel (default selection) or Auxiliary Channel. Enable both if an AUX monitor will be
used.
Preview Mode
• For 1 channel, select the 1 screen option.
• For 4 channels, select the 1 or 4 screen option.
• For more than 4 but less than 9 channels, select the 1, 4 or 9 screen options.
• For 16 channels, select the 1, 4, 9, 12, or 16 screen options.
Switch Time: The image preview switch time.
Selections: Never (default selection), 5, 10, 20, 30, 60, 120, 300 seconds.
If “Never” is selected, the preview image will not be switched automatically. Example: for a 16 channel DVR, if a 4
Screen preview mode and 20 second Switch Time is selected, the DVR will cycle through the display 4 channels at a
time every 20 seconds.
Audio Preview
If the audio preview is enabled with a check mark “9”, the DVR will play the audio of the channel viewed.
Alarm Aux(iliary) Out: Select: Main Chan(nel) (default selection), Aux(iliary) Chan(nel).
Display Delay: Delay before switching between on screen display camera views. Select: 10 (default selection), 1, 2,
3, 4, 5, 6, 7, 8, 9 seconds.
Layout: Customize the DVR preview screen to display an assigned order of the channel camera images.
• In the Preview screen there is a square frame that can be divided into several image squares.
• If a 4 screen Preview Mode is selected, this frame will automatically divide itself into 4 squares. Each square
represents one camera image and each square is numbered in a sequential order.
• Use the navigation arrow buttons “◄”, “►”, “▲” and “▼” on the DVR controls, remote control or use the mouse
pointer to highlight any of the squares to change their number sequence.
• Press “EDIT” to convert the up, down arrow buttons to increase or decrease the number order in each square or
enter a number using the keypad. When the number selection in the square is complete, press “ENTER” to save the
change. Repeat this procedure for each square. Left click a mouse on each square to change the square’s number
order.
• If the number sequence is cycled through to an “x”, that square will not display an image.
• There is a number bar under the main square frame to display the preview order of all the DVR camera channels.
• Press Confirm to save changes.
• After the camera preview order has been defined, exit from the menus to view the Preview Mode screen and check
the layout.
NOTE: If an inactive camera is left with a number in a square and not an “x”, “NO VIDEO” will appear on screen if a
camera is not connected to that input.
Transact(ion) Menu
Each DVR can support 1 ATM machine. The DVR can actively obtain or passively receive a credit card number from
an ATM machine connected through a network or the serial port. The credit card number can be overlaid onto the live
video, recorded and played back. The following description indicates how to proceed with relevant configurations
according to different links to the ATM machine.
Highlight the Transaction icon in the Main Menu and press “ENTER” at the DVR controls, remote control or left click
with a mouse to open the configuration screen.
To make selections in this screen,
1. Use the “◄”, “►”, “▲” and “▼” arrow buttons on the DVR controls or remote control or mouse pointer to high light
the screen selections.
2. Press “EDIT” to change a selection
3. Use
“▲”, “▼” to change the selection. Left click the mouse to change the selection.
4. Press “ENTER” to save a selection and return to the Image Menu.
5. After making changes, press Confirm to save the changes or Cancel not to save the changes.