ElmoMC Gold Line Digital Servo Drives-Gold Tuba - Manual (Page 16)

Gold Tuba Installation Guide
MAN-G-TUBIG-EC (Ver. 1.201)
| www.elmomc.com
16
Table of Contents
5.4. Mounting the Gold Tuba
For optimum heat dissipation, the Gold Tuba should be installed with the heat sink attached to the
machine's chassis. It is recommended to mount the Gold Tuba in the vertical position.
M6 round head screws, one through each opening in the heat sink, are used to mount the Gold
Tuba (see the diagram below).
Figure 1: Mounting the Gold Tuba