ElmoMC Gold Line Digital Servo Drives-Gold Tuba - Manual (Page 75)

Gold Tuba Installation Guide
MAN-G-TUBIG-EC (Ver. 1.201)
| www.elmomc.com
75
Table of Contents
7.14.6. EtherCAT Switches
Note: This option is only available in the G-TUB XX/YYY F XXXX type. The EtherCAT address of each
axis is specified by the two EtherCAT switches. For full details, see Section 12.2 in the MAN-G-Panel
Mounted Drives Hardware manual.
EtherCAT Switches