ElmoMC Gold Line Digital Servo Drives-Gold Tuba - Manual (Page 23)

Gold Tuba Installation Guide
MAN-G-TUBIG-EC (Ver. 1.201)
| www.elmomc.com
23
Table of Contents
7.1.3. Feedback Cable Port C Connector
1. At the controller side connections, follow the controller manufacturer’s recommendations
concerning the shield.
2. The connection of the Drain wire to the Port C is not mandatory.
Figure 6: Feedback Port C Cable Assemblies
7.1.4. IO Cable Connector
It is recommended to use shielded cable, but is not mandatory.
Figure 7: Feedback IO Cable Assemblies