5 electrical connection, 6 commissioning, 1 supply voltage for as-i safety monitor – EUCHNER AS-i Safety Monitor for 2 AS-i circuits User Manual
Page 21: 2 duplicate address recognition, Electrical connection, Commissioning, Supply voltage for as-i safety monitor, Duplicate address recognition, As-i master without duplicate address recognition
AS-i Safety Monitor for 2 AS-i circuits
Installation
Subject to reasonable modifications due to technical advances
Id.-No.: 103336
Issue date - 24.10.2008
EUCHNER GmbH + Co. KG
21
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen
Tel. +49/711/75 97-0 • Fax. +49/711/753316
5.5
Electrical Connection
5.6
Commissioning
5.6.1
Supply voltage for AS-I Safety Monitor
5.6.2
Duplicate address recognition
5.6.2.1
AS-i Master without duplicate address recognition
Information!
Electrical connections are described in section <Electrical connection>
Supply by AS-i
Redundant: supply out of AS-i...
...or out of 24 V aux. power
... or out of AS-i 2
AS-i
24 V, 0 V
AS-i
AS-i 2
AS-i 1
AS-i 1
PWR 1
Gateway
Monitor
Power supply
Duplicate address recognition in the AS-i Safety Monitor active
AS-i 2
PWR 2
Power supply