EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 74)

74 Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
9.4.5 ERROR COUNTERS
Main Menu|| DIAGNOSIS || AS-I CIRCUIT || ERROR COUNTERS ||
This list displays the fault counter for each single AS-i slave.
In addition, the number of voltage dropouts/undervoltage on AS-i (APF) is dis-
played.
Selecting RESET resets the fault counter to 0.
9.4.6 LPF (List of Peripheral Faults)
Main menu|| DIAGNOSIS || AS-I CIRCUIT || LPF LIST OF PERIPH. FAULTS ||
This list shows the list of slaves which have triggered peripheral faults (LPF).
AS-I CIRCUIT 1
AS-I CIRCUIT 2
ERROR COUNTERS
RESET
1A - 0
...
31A - 65535
1B - 34
...
30B - 0
AS-I CIRCUIT 1
AS-I CIRCUIT 2
LPF LIST OF
PERIPH. FAULTS
| 1A-X
2A- | 3A-
4A-X | 5A-X
....
30A-X | 31A-
| 1B-X