EUCHNER AS-i Safety Monitor for 2 AS-i circuits User Manual
Page 62
62
Subject to reasonable modifications due to technical advances
Id.-No.: 103336
Issue date - 24.10.2008
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen
Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
In this menu you send the safe configuration stored on the memory card to the
EEPROM on the Monitor. Use the keys to set the release code and confirm with
OK.
After a bank on the chip card has been written to, this bank is the active bank. To
activate the new configuration, the Safety Monitor must be started.
STOP MONITOR
OK
COPY BANK A to
MONITOR
RELEASE DATE:
2006/06/17 18:43
BY:
ROLF BECKER
CONFIG NAME:
L3040 MIT LADEVO
RRICHTUNG LINKS U
ND PALETTENWECHS
LER V1.23
RELEASE CODE:
1BDF
---------------
TYPE CODE
1BDF OK
START MONITOR
OK