EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 76)

76 Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
9.5 SETUP
Main Menu || SETUP ||
This menu contains the following sub-menus:
9.5.1 CHIPCARD
Main Menu|| SETUP || CHIPCARD ||
This function is used to send unsafe AS-i data between the master and chip card.
In addition, the unsafe section of the chip card can be deleted.
For additional information refer to <Chip card>.
CHIPCARD
LANGUAGE
FACTORY RESET
CHIPCARD: Read/write or delete chip card
LANGUAGE: Menu language selection
FACTORY RESET: Restore factory default settings
CHIPCARD
CARD -> MONITOR
MONITOR -> CARD
CLEAR CHIPCARD
CHIPCARD->MONI-
TOR:
Chip card data are copied to the Monitor
MONITOR->CHIP-
CARD:
Monitor data are copied to the chip card
CLEAR CHIPCARD: Chip card data are cleared