EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 53)

AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 53
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
9.3 AS-I SAFETY
Main Menu || AS-I SAFETY || TEACH SAFETY ||
This menu enables the following functions:
9.3.1 TEACH CODES
The TEACH CODES menu enables teaching of code sequences using the dis-
play.
9.3.1.1 TEACH CODES – COMPLETE
Main Menu || AS-I SAFETY || TEACH CODES || TEACH CODES COMPLETE ||
In the sub-menu TEACH CODES COMPLETE you teach the code tables for all
included safety AS-i slaves.
First enter the PIN and confirm with OK.
TEACH SAFETY
SAFE OUTPUT CH
SAFE COUPLING
START/STOP
CLEAR SAFE CFG
PIN
SAFE CHIPCARD
PROTECT
TEACH SAFETY: Teaching code sequences using the display
SAFE OUTPUT CH: Display function for the status of the individual channels
SAFE COUPLING: Generating safe coupling slaves on the second AS-i circuit
(Optional Menu)
1
START/STOP Changing mode
Safe operating mode / configuration mode
CLEAR SAFE CFG: Deleting the safe configuration
PIN: Changing the PIN number
SAFE CHIPCARD: Chip card configuration
PROTECT: Protecting the configuration on the chip card
1. This function is only displayed if no coupling slaves were entered in the configuration.
TEACH CODES
COMPLETE
SINGLE SLAVE
COUPLING SLAVE
SNGL SLAVE CODE