Breville ESPRESSO MACHINE User Manual

Page 14

Advertising
background image

2 7

CARE AND CLEANING

2 6

CARE AND CLEANING

Soak the tip in hot water before using

the pin on the Cleaning Tool to unblock.

Replace the tip back onto the Steam

Wand and secure with the Cleaning Tool.

CLEANING THE FILTERS, FILTER HOLDER

AND BREWING HEAD

The stainless steel Filters and Filter

Holder should be rinsed under water

directly after use to remove all coffee

particles. Should the fine holes in the

filters become blocked, the fine pin on

the Cleaning Tool can be used to clear

the holes.

The Brew Head interior should be wiped

with a damp cloth to remove any ground

coffee particles.

Periodically run water through the

machine with the Filter Holder in place,

but without any ground coffee, to rinse

out any residual coffee particles.

CLEANING THE OUTER HOUSING /

CUP WARMING PLATE

The outer housing and cup warming

plate can be cleaned with a soft, damp

cloth (do not use abrasive cleansers,

pads or cloths which can scratch the

surface).

CLEANING THE DRIP TRAY

The Drip Tray should be removed,

emptied and cleaned at regular intervals,

particularly when the Drip Tray Full

Indicator is showing full.

Remove the Drip Tray Full Indicator and

Grid from the Drip Tray, wash with warm

soapy water, using a non-abrasive

washing liquid, rinse and dry thoroughly.

If further cleaning is required the full

indicator can be removed from the drip

tray by releasing the side snaps.

CLEANING THE STORAGE TRAY

The Storage Tray can be removed after

the Drip Tray is removed then cleaned

with a soft, damp cloth (do not use

abrasive cleansers, pads or cloths which

can scratch the surface).

DECALCIFYING

After regular use, hard water can cause

mineral build up in and on many of the

inner functioning components, reducing

the brewing flow, power of the machine,

and affecting the quality of coffee.

We advise decalcifying the machine on a

regular basis (every 2-3 months) using a

liquid decalcifying agent. Follow the

instructions provided, or use the

following

as a guide:

Diluted solution (for softer water)

1 part decalcifying agent

2 parts cold tap water

Concentrated solution (for harder water)

1 part decalcifying agent

1 part cold tap water

NOTE: Do not clean any of the

parts or accessories in the

NOTE: The stainless steel Filters

should not come in contact

with any decalcifying

agents.

Do not use powdered

CAUTION: DO NOT IMMERSE CORD, PLUG OR APPLIANCE IN WATER

OR ANY OTHER LIQUID.

THE WATER TANK SHOULD NEVER BE REMOVED OR

COMPLETELY EMPTIED DURING DECALCIFYING.

BR6659_800ESXL_Book_US.qxp 15/2/06 4:54 PM Page 26

Advertising