Breville ESPRESSO MACHINE - Manual (Page 7)

STEP 1 – FILLING THE WATER TANK
• Ensure the Power On/Off button is ‘Off’
and
the Selector Control is set to the ‘•’
Standby position.
• Turn the machine off at the power outlet
and unplug the power cord.
• Remove the Filter Holder if locked into
the Brew Head and move the Steam
Wand to the side of the machine.
• Remove the Water Tank by pulling with
the handle insert in the front of the
Espresso Machine.
• When the Water Tank is removed, a black
tube slides and extends out from the
Water Tank storage area. Do not touch
or try to remove this tube, it will
automatically slide back into position
when the Water Tank is reinserted.
• Fill the Water Tank with cold water to
the maximum mark on the Water
Window and slide the Water Tank
carefully back into position in the
machine.
• Alternatively the Water Tank can be
accessed from the rear of the machine.
Press the button at the back of the Cup
Warming Plate and the Water Tank Filler
will open. Ensure the Water Tank is fitted
firmly into position. Fill with cold water
to the maximum mark on the Water
Window and close the Water Tank Filler.
NOTE: Check the water level
before use and replace the
water daily.
The water tank should be
refilled with fresh cold
water before each use.
Do not use mineral or
1 3
OPERATING YOUR BREVILLE DIE CAST SERIES™ ESPRESSO MACHINE
OPERATING YOUR BREVILLE DIE CAST SERIES ESPRESSO MACHINE
Operating
BR6659_800ESXL_Book_US.qxp 15/2/06 4:54 PM Page 12