Lenze I/O system 1000 - Manual (Page 11)

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
11
2 System and product description
2.5 Available I/O compound modules
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
EPM-S502 AO2, 12BIT, DC 0/4…20mA 2 analog outputs, 0/4 … 20 mA 4 bytes
EPM-S503 AO4, 12BIT, DC 0/4…20mA 4 analog outputs, 0/4 … 20 mA 8 bytes
Temperature measurement
EPM-S404
AI2, 16bits, resistor 4 analog inputs
for resistance measurement
4 bytes
EPM-S405 AI2, 16bits, thermo 2 analog inputs
for thermocouple measurement
4 bytes
Numerator
EPM-S600
Counter 1, DC 24V 1 counter 32 bits, 24 V DC
(reading, setting, comparing)
12 bytes, reading
10 bytes, writing
EPM-S601 Counter 2, DC 24V 2 counters 32 bits, 24 V DC
(reading, setting)
12 bytes, reading
12 bytes, writing
EPM-S602 Counter 1, DC 5V 1 counter 32 bits, 5 V DC
(reading, setting)
8 bytes, reading
10 bytes, writing
EPM-S603 Counter 2, DC 24V 2 counters 32 bits, 24 V DC
(reading)
12 bytes, reading
4 bytes, writing
Encoder evaluation
EPM-S604
SSI 1 SSI absolute value encoder 6 bytes, reading
Pulse width modulation
EPM-S620
PWM 2, DC 24V 2 digital outputs, 0.5 A PWM 12 bytes, reading
4 bytes, writing
Communication
EPM-S640
RS232 RS232 module -
EPM-S650 RS422/RS485 RS485 module -

Note!
I/O compound modules EPM-S207/EPM-S310
• If, for instance, motor positions are to be evaluated via these modules, additional
modules with ticker function as e.e.g. EPM-S600 (HTL), EPM-S602 (TTL) or EPM-S604
(SSI) are required for detecting the encoder signals.
• Only if the modules EPM-S207 and EPM-S310 are connected to the backplane bus of
the L-force Controller: The following modules are available in the
"L_SM3_DriveUtil.lib" function library for the I/O system 1000:
• L_SMC_AbortTrigger_FastIO
• L_SMC_TouchProbe_FastIO
• More information can be obtained from the online help for the function library.
I/O compound modules EPM-S640/EPM-S650
• For using the modules EPM-S640 and EPM-S650, the "L_COM_EPMS640" function
library is available.
• More information can be obtained from the online help for the function library.
Type designation Short designation Description Process data