Lenze I/O system 1000 - Manual (Page 5)

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
5
1 About this documentation
1.2 Terminology used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Terminology used
Term Meaning
Engineering tools Software solutions for easy engineering in all phases
»EASY Navigator« – ensures easy operator guidance
• All practical Lenze engineering tools at a glance
• Tools can be selected quickly
• The clarity makes the engineering process easy right from the start
»EASY Starter« – easy-to-use tool for service technicians
• Especially designed for commissioning and maintaining Lenze devices
• Graphic surface with very few icons
• Easy to run online diagnostics, set parameters and perform
commissioning
• No risk of accidentally changing an application
• Loading off-the-shelf applications onto the device
»Engineer« – multi-device engineering
• For all products in our L-force portfolio
• Practical user interface
• Graphic interfaces make it easy to navigate
• Can be applied in every phase of a project (project planning,
commissioning, production)
• Parameter setting and configuration
»PLC Designer« – for programming processes
• The ability to create your own programs
• The ability to program logic & motion in accordance with IEC 61131-3
(AWL, KOP, FUP, ST, AS and CFC-Editor), based on CoDeSys V3
• Function blocks certified according to PLCopen Part 1 + 2
• Graphic DIN 66025 editor (G code) with DXF import
• Integrated visualisation for simple presentation of processes
• All important information at a glance during commissioning
L-force Controller The L-force Controller is the central component of the automation system, controlling
the Logic and Motion functionalities (by means of the runtime software).
The L-force Controller uses the fieldbus to communicate with the field devices.
Engineering PC The Engineering PC with the installed engineering tools serve to configure and
parameterise the system.
The Engineering PC communicates with the L-force Controller via Ethernet.
EtherCAT® EtherCAT® is a registered trademark and patented technology licenced by the Beckhoff
Automation GmbH, Germany.