3 example: commissioning of a counter (epm-s601), Example: commissioning of a counter (epm-s601) – Lenze I/O system 1000 User Manual
Page 29
Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
29
4
Mapping the real station structure in the »PLC Designer«
4.4
Configuring I/O modules on the CANopen bus coupler module
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.4.3
Example: Commissioning of a counter (EPM-S601)
How to commission a counter using the example of an EPM-S601:
1. Create a new »PLC Designer« project.
For the general procedure, see the chapter "
Creating a new project in the »PLC Designer«
Defining the update and connection of gateway/control
2. Double-click the L-force Controller in the device view to open its settings and properties in
the editor view.
3. Check the following on the PLC settings tab:
4. Add the matching gateway on the communication settings tab.
• Either via double-click or Add gateway... button