Lenze I/O system 1000 User Manual
Page 15
Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
15
4
Mapping the real station structure in the »PLC Designer«
4.1
Creating a new project in the »PLC Designer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. Go to the Standard project dialog window and select the "L-force Controller 3200 C Logic
(Lenze)" in the Device selection list.
In the
PLC_PRG in selection list, you can additionally select a programming language:
• Sequential function chart (SFC)
• Instruction list (IL)
• Continuous function chart (CFC)
• Function block diagram (FBD)
• Ladder diagram (LD)
• Structured text (ST)
5. Confirm the selection by clicking OK.
Next steps:
The following chapters describe by means of examples how to add the available I/O system to the
device view of the »PLC Designer« depending on the fieldbus used:
Configuring the I/O modules at the backplane bus of the L-force Controller