Lenze I/O system 1000 - Manual (Page 3)

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
3
1 About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
This documentation supplements the system manual for the I/O system 1000 by information on
how to configure and parameterise the I/O system with the »PLC Designer« engineering tool.
Target group
This documentation is directed at all persons who would like to parameterise, configure, and
diagnose the L-force I/O system 1000 using the L-force »PLC Designer« engineering tool.
Information regarding the validity
The information provided in this documentation is valid for the following standard devices:
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the device and the software version of the installed »PLC Designer«, the screenshots in
this documentation may differ from the screen display.
Document history

Tip!
Information and tools all about the Lenze products can be found in the Internet:
http://www.Lenze.com  Download

First, read the I/O system 1000 system manual before you start working.
The system manual includes safety instructions which must be observed!
Product series Type designation Version
I/O systems I/O system 1000 From hardware version 1B or software version 10
Version Description
1.2 11/2012 TD05 General revision of the document structure, extension of the module overview by
I/O compound modules EPM-S406 and EPM-S408.
1.1 07/2012 TD06 Extended by the "Commissioning of a counter" example
1.0 11/2011 TD11 First edition