Lenze I/O system 1000 - Manual (Page 40)

6 Error messages (backplane bus)
40
Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
137 Too many tasks for the processing of I/O modules Reduce the number of tasks.
Three tasks are maximally
possible.
138 Device description does not contain a device type Contact Lenze
139 Error while writing the initialisation parameters Contact Lenze
140 No definition for number of channels in device description Contact Lenze
181 Synchronisation of the I/O system incorrect Contact Lenze
200 SDO timeout Contact Lenze
220 SDO communication error Contact Lenze
221 Physical I/O module topology could not be read. Contact Lenze
222 I/O system driver could not be opened. Contact Lenze
Error number Error text Remedy