Rockwell Automation 22-COMM-L LonWorks Adapter - Manual (Page 22)

2-6 Installing the Adapter
1. Install the drive cover. The status indicators can be viewed on the
front of the drive after power has been applied.
2. Apply power to the PowerFlex drive. The adapter receives its power
from the connected drive. When you apply power to the adapter for
the first time, the topmost status indicator on the adapter should be
solid green. If it is not green, refer to
Chapter 5 , Troubleshooting .
Applying Power
!
ATTENTION: Risk of equipment damage, injury, or death exists.
Unpredictable operation may occur if you fail to verify that parameter
settings are compatible with your application. Verify that settings are
compatible with your application before applying power to the drive.