Rockwell Automation 22-COMM-L LonWorks Adapter - Manual (Page 23)

Chapter
3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to Appendix B , Adapter Parameters . For
definitions of terms in this chapter, refer to the Glossary .
The LonWorks adapter stores parameters and other information in its
own non-volatile memory. You must, therefore, access the adapter to
view and edit its parameters. The following tools can be used to access
the adapter parameters:
Topic Page
Configuration Tools 3-1
Using the PowerFlex 4-Class HIM 3-2
Setting the Comm Fault Action 3-3
Setting the Idle Fault Action 3-4
Resetting the Adapter 3-5
Viewing the Adapter Configuration 3-6
Configuration Tools
Tool Refer To:
PowerFlex 4-Class HIM
(22-HIM-*) Page 3-2
DriveExplorer Software
(version 3.01 or higher) http://www.ab.com/drives/driveexplorer, and
DriveExplorer online help (installed with the software)
DriveExecutive Software
(version 3.01 or higher) http://www.ab.com/drives/drivetools, and
DriveExecutive online help (installed with the software)