Rockwell Automation 22-COMM-L LonWorks Adapter - Manual (Page 40)

4-12 Configuring the Network
Variable: nvoDigInput2
Format: SNVT_switch
Explanation: This Network Variable Output provides the status of drive
digital input 2 via Logic Status word bit 13 (see
Logic Status Word on
page C-2 ).
Variable: nvoDrvFault
Format: SNVT_count
Explanation: This Network Variable Output provides the drive fault
code.
PowerFlex 40 Drive Parameter Equivalent: Parameter d007 - [Fault 1
Code]
PowerFlex 400 Drive Parameter Equivalent: Parameter b007 - [Fault
1 Code]
Variable: nvoGenRdData
Format: SNVT_count
Explanation: This Network Variable Output provides data from the
parameter number defined by nciGenRdAdr. Data size is 2 bytes.
Scaling: No scaling is performed and all data is presented in raw format.
Parameter Mapping: nciGenRdAdr
Digital Input 2 Status
nvoDigInput 2 Variable
Status Value (%) State
0.0 0 Input 2 Disabled
100.0 1 Input 2 Enabled
Drive Error
Generic Parameter Data