Rockwell Automation 22-COMM-L LonWorks Adapter - Manual (Page 43)

Configuring the Network 4-15
NCI: nciMinSpeed
Format: SNVT_lev_percent
Explanation: This Network Configuration Input limits the minimum
speed that can be set from the network to the drive. The value is entered
as a percentage of nominal frequency as defined by the Nominal
Frequency (nciNmlFreq) configuration value. For example, if
nciNmlFreq = 50 Hz and nciMinSpeed = 10.000%, the minimum speed
is 5 Hz.
Valid Range: The minimum speed value is validated as follows:
-163.840%
≤minimum speed ≤maximum speed ≤163.830%
Default Value: 0.000%
NCI: nciMaxSpeed
Format: SNVT_lev_percent
Explanation: This Network Configuration Input limits the maximum
speed that can be set from the network to the drive. The value is entered
as a percentage of nominal frequency as defined by the Nominal
Frequency (nciNmlFreq) configuration value. For example, if
nciNmlFreq = 50 Hz. and nciMaxSpeed = 125.000%, the maximum
speed is 62.5 Hz.
Valid Range: The maximum speed value is validated against the value
of the minimum speed as follows:
-163.840%
≤minimum speed ≤maximum speed ≤163.830%
Default Value: 100.000%
Minimum Speed
Maximum Speed