Rockwell Automation 22-COMM-L LonWorks Adapter - Manual (Page 38)

4-10 Configuring the Network
Variable: nvoDrvRunHours
Format: SNVT_time_hour
Explanation: This Network Variable Output provides the drive total
running time in whole hours.
PowerFlex 40/400 Drive Parameter Equivalent: Parameter d018 -
[Elapsed Run Time]
Variable: nvoDCBusVolt
Format: SNVT_volt
Explanation: This Network Variable Output provides the DC Bus
voltage in volts.
PowerFlex 40/400 Drive Parameter Equivalent: Parameter d005 -
[DC Bus Voltage]
Variable: nvoDrvRunning
Format: SNVT_switch
Explanation: This Network Variable Output indicates if the drive is
running (active). It is the same status as read from bit 1 in nvoDrvStatus.
Operation Hour Counter
DC Bus Output
Drive Running
nvoDrvRunning Variable
Status Value (%) State
0.0 0 Not Active
100.0 1 Active