Rockwell Automation 1336VT 5-300 AMP (2.2-160KW) User Manual
Page 117
Advertising
Logic Interface Options
Appendix A
A-19
1336ĆMODĆL3 115V AC
Terminal 30 and Interface Common
Logic Interface Board
(This signal must be maintained as True to permit the drive to operate from any
control source.)
Enable
Maintained True = Drive Enabled
False = Disable Drive
Enable must be a maintained True input to permit the drive to run and jog
the motor. If this input is False for 20mS or longer, drive operating
capabilities are not permitted and drive outputs are disabled forcing the
motor to coast-to-stop. Power however, is not be removed from the drive’s
control logic and drive programming can still be accessed.
Advertising