Rockwell Automation 1746-BTM Barrel Temperature Control Module User Manual - Manual (Page 69)

1 Publication 1746-UM010B-EN-P - April 2001
Chapter
9
Sample Program
This chapter describes:
•
Obtaining the sample program from the internet
•
Configuring Your SLC processor, Off–line
•
Using the Sample Program
•
General Programming Notes
You can obtain the sample program from the Allen–Bradley website
on the Internet and download it to your PC as an executable file.
Obtaining the Sample
Program from the Internet To Access the Internet:
1. Access the Sample Program and manuals at the Allen–Bradley
website: http://www.ab.com/appsys/
2. Download the sample program to your PC.
3. Move the sample program into the subdirectory on your hard
drive where your programming software looks for files.
For example, with
RSLogix500:
– C:\program files\rockwell software\rslogix 500
english\projects
RSLogix500 Version The examples in this chapter were built using RSLogix500 version
4.50.00. For other types of programming software, the procedure and/
or prompts may vary.
BTM Firmware Revision The examples in this chapter were written for BTM firmware Revision
2.00 or greater.
Support for 5/03, 5/04, 5/04P,
5/05, and 5/05P Processors
Using BTM201.rss Using the code in file BTM201.rss you will be able to have multiple
BTMs in a SLC system without having to duplicate code for each BTM.
The only code that will need to be added will be in the M1/M0