Rockwell Automation 1747-L40 SLC 500 Fixed Hardware Style - Manual (Page 116)

Appendix A
Setting Up the DH-485 Network
A–11
Connecting the Communication Cable to the Isolated Link Coupler
Attach the terminal block of the link coupler to the Belden #9842 cable as
shown below. Additional terminal blocks are available for replacement, see
chapter 9.
Single Cable Connection
6 Termination
5 A
4 B
3 Common
2 Shield
1 Chassis Ground
White with Orange Stripes
Orange with White Stripes
Blue with White Stripes
Drain Wire
Shrink Tubing Recommended
Belden #9842
Multiple Cable Connection
to Successive Device
to Previous Device
19525