Rockwell Automation 1769-IT6 Compact I/O 1769-IT6 Thermocouple/mV Input Module - Manual (Page 143)

Rockwell Automation Publication 1769-UM004B-EN-P - March 2010 143
Module Configuration by Using a MicroLogix 1500 System and RSLogix 500 Software Appendix E
The 1769-IT6 module is installed in slot 1. To configure the module,
double-click the module/slot. The general configuration dialog box appears.
Configuration options for channels 0…2 are on a separate tab from channels 3…5,
as shown below. To enable a channel, click its Enable box so that a checkmark
appears. For optimum module performance, disable any channel that is not
hardwired to a real input. Then, choose your Data Format, Input Type, Filter
Frequency, Open Circuit response, and Units for each channel.
TIP For a complete description of each of these parameters and the choices
available for each of them, see
Configuration Data File on page 41 .