Rockwell Automation 1769-IT6 Compact I/O 1769-IT6 Thermocouple/mV Input Module - Manual (Page 41)

Rockwell Automation Publication 1769-UM004B-EN-P - March 2010 41
Module Data, Status, and Channel Configuration Chapter 4
Configuration Data File
The default value of the configuration data is represented by zeros in the data
file. The structure of the channel configuration file is shown below
.
The configuration file can also be modified through the control program, if
supported by the controller. For information on configuring the module in a:
• MicroLogix 1500 system by using RSLogix 500 software,
see Appendix E .
• CompactLogix system by using RSLogix 5000 software,
see Appendix F .
• 1769-ADN DeviceNet adapter by using RSNetWorx software,
see Appendix G .
The structure and bit settings are shown in Channel Configuration on page 42 .
Word/
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0
Enable
Channel
0
Data Format
Channel 0
Input Type
Channel 0
Temperature
Units Channel
0
Open-circuit
Condition
Channel 0
Not
Used
Not
Used
Filter Frequency Channel 0
1
Enable
Channel
1
Data Format
Channel 1
Input Type
Channel 1
Temperature
Units Channel
1
Open-circuit
Condition
Channel 1
Not
Used
Not
Used
Filter Frequency Channel 1
2
Enable
Channel
2
Data Format
Channel 2
Input Type
Channel 2
Temperature
Units Channel
2
Open-circuit
Condition
Channel 2
Not
Used
Not
Used
Filter Frequency Channel 2
3
Enable
Channel
3
Data Format
Channel 3
Input Type
Channel 3
Temperature
Units Channel
3
Open-circuit
Condition
Channel 3
Not
Used
Not
Used
Filter Frequency Channel 3
4
Enable
Channel
4
Data Format
Channel 4
Input Type
Channel 4
Temperature
Units Channel
4
Open-circuit
Condition
Channel 4
Not
Used
Not
Used
Filter Frequency Channel 4
5
Enable
Channel
5
Data Format
Channel 5
Input Type
Channel 5
Temperature
Units Channel
5
Open-circuit
Condition
Channel 5
Not
Used
Not
Used
Filter Frequency Channel 5
6 Reserved
Enable/Disable
Cyclic
Calibration