Installation and wiring, Compliance to european union directives, Emc directive – Rockwell Automation 1769-IT6 Compact I/O 1769-IT6 Thermocouple/mV Input Module User Manual
Page 23: Low voltage directive, Chapter 3, Emc directive low voltage directive, Chapter
Rockwell Automation Publication 1769-UM004B-EN-P - March 2010
23
Chapter
3
Installation and Wiring
This chapter tells you how to:
• determine the power requirements for the modules.
• avoid electrostatic damage.
• install the module.
• wire the module’s terminal block.
• wire input devices.
Compliance to European
Union Directives
This product is approved for installation within the European Union and EEA
regions. It has been designed and tested to meet the following directives.
EMC Directive
The 1769-IT6 module is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in whole or
in part, documented in a technical construction file:
• EN 50081-2
EMC—Generic Emission Standard, Part 2 - Industrial Environment
• EN 50082-2
EMC—Generic Immunity Standard, Part 2 - Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers,
Part 2 – Equipment Requirements and Tests.
For specific information required by EN61131-2, see the appropriate sections in
this publication, as well as the Industrial Automation, Wiring and Grounding
Guidelines for Noise Immunity, publication