Status and monitoring tabs – Rockwell Automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input/Output User Manual
Page 49
Advertising
Rockwell Automation Publication 1732E-UM005A-EN-E - July 2012
41
Configure Your Analog Input and Output Modules with RSLogix 5000 Software Chapter 3
particular channel. The Calibration Range that appears on the Calibration tab is
dependent on the output range configured for the channel.
For detailed information about calibration, see
Calibrate Your Modules on
page 45
.
Status and Monitoring Tabs
Although each dialog box maintains importance during online monitoring, some
of the tabs, such as the Module Info and Network, are blank during the initial
module configuration.
Advertising
This manual is related to the following products: