Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad User Manual - Manual (Page 29)

Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014 29
Chapter
3
Operation
Chapter Objectives This chapter provides information on the following topics:
• Operating Guidelines
• Keypad Function Setting
• Start the Computer
• Restart the Computer
• Shut Down the Computer
Operating Guidelines Follow these operating guidelines for your computer.
• Operator access is limited to the front of the computer, which includes the
display and the touchscreen (if available).
• When mounted in an enclosure, keep the enclosure door closed during
operation so dust and other airborne contamination do not infiltrate the
computer. Open the door only for routine maintenance.
• Do not operate the computer with the covers removed. Removing the
covers disrupts air flow and results in overheating.
• Always use the proper power down procedures as required by your
operating system, such as the Shut Down command in the Microsoft
Windows operating system.
• After shutting down the computer, do not apply power again until
shutdown is complete.
For computers with a HDD, the HDD must come to a complete stop,
which can take up to 30 seconds after shutdown is initiated.
ATTENTION: Access to components behind the panel where the
computer is installed and the front USB port (if available) is restricted to
authorized and properly trained personnel.
SHOCK HAZARD: All covers are required to maintain EMI shield.