Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad User Manual - Manual (Page 39)

Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014 39
Component Replacement Chapter 4
Install a Second HDD
You can install another HDD in the secondary (top) bay.
Follow these steps to install a second HDD.
1. Follow the steps for Pre-configuration on page 35 .
2. Remove the computer cover as detailed in Remove the Cover on page 36 .
3. Locate and remove the security screw below the ODD; set the screw aside.
4. Remove the HDD assembly from the
secondary bay.
a. Loosen the two captive thumbscrews
of the HDD assembly (A).
b. Pull the HDD assembly from its bay
(B).
TIP Use an antistatic wrist strap connected to the work surface, and
properly grounded tools and equipment.
TIP Use a magnetized screwdriver to prevent the screw from falling into
the chassis.
Security Screw
B
A
A