Summary of changes, New and updated information – Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad User Manual User Manual

Page 3

Advertising
background image

Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014

3

Summary of Changes

This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.

New and Updated
Information

This table contains the changes made to this revision.

Topic

Page

Added title and updated ‘Preface Objectives’ section

9

Added ‘Abbreviations’ section

10

Updated ‘Chapter Objectives’ section

11, 17, 29, 33, 47

Added link to Rockwell Automation Product Compatibility and Download Center (PCDC) website

11, 49, 57, 59

Removed ‘Multilingual User-interface CD Pack’ section

12

Reduced what compact discs (CDs) are shipped with computer in ‘Parts List’ section

12

Moved existing information into ‘Installation Precautions’ section

18

Revised title and added information to ‘Installation Guidelines’ section

19

Moved existing information into ‘Mounting Clearance Requirements’ section

20

Moved existing installation and mounting information into ‘Install the Computer’ section

22

Added steps in ‘Mount the Display Computer in a Panel’ section

23

Moved existing AC and DC power information into ‘Connect Power’ section

25

Added Attention table in ‘Connect Power’ section

25

Updated IEC number for power cord in ‘Connect AC Power’ section

26

Changed Attention table to Shock Hazard table in ‘Connect AC Power’ section

26

Revised and added steps in ‘Connect DC Power’ section

27

Added information in ‘Functional Ground Screw’ section

27

Moved ‘Operator Access’ section into ‘Operating Guidelines’ section

29

Added information in ‘Operating Guidelines’ section

29

Added information in ‘Start the Computer’ section

30

Added information in ‘Restart the Computer’ section

31

Added information in ‘Shut Down the Computer’ section

32

Updated link to Rockwell Automation Computers and Operators Interface website

33, 53

Updated step 4 in ‘Post-configuration’ section

35

Added step 4 in ‘Remove the Cover’ section

36

Added information in ‘Reinstall the Cover’ section

36

Added ‘Drive Precautions’ section

37

Added ‘Hardware Monitoring’ section

47

Added Tip table in ‘Troubleshooting’ section

48

Revised opening paragraph for ‘Troubleshooting Checklists’ section

48

Replaced ‘Diagnostic Utility’ section with ‘Load the System Defaults’ section

51

Added ‘Clear the CMOS’ section

51

Added ‘Ship or Transport the Computer’ section

52

Added Turkey RoHS statement in Certifications table

55

Revised information in ‘Upgrade the BIOS from the CD Drive’ section

59

Revised information in ‘Upgrade the BIOS from an External Floppy Disk Drive’ section

61

Advertising