Backlight assembly disposal – Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad User Manual User Manual
Page 46
46
Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014
Chapter 4
Component Replacement
5. Insert the new battery with the positive polarity (+ side) facing up, and
make sure that it is seated completely.
6. Reinstall the computer cover as detailed in
Reinstall the Cover on page 36
.
7. Follow the steps for
.
8. During POST, press F2 to enter the BIOS setup and reconfigure settings.
Backlight Assembly Disposal
IMPORTANT
Replacing the battery results in all BIOS settings returning to their
default settings. BIOS settings other than default must be reconfigured
after replacing the battery.
This computer contains a sealed lithium battery that may need to be
replaced during the life of the computer.
At the end of its life, the battery contained in this computer should be
collected separately from any unsorted municipal waste.
ATTENTION: The backlight assembly in this computer can contain mercury. At
the end of its life, this equipment should be collected separately from any
unsorted municipal waste.