Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. - Manual (Page 12)

2-6 USB Converter User Manual
2.7 Modes of Operation
The converter reports its status using the status indicators ( Figure 2.4 ).
The following table describes the state of the status indicators under normal operation:
Important: If the diamond status indicator is red, there is a problem. Refer to
Chapter 5, Troubleshooting .
Figure 2.4 – Status Indicators on the Converter
Table 2.3 – Status Indicator Descriptions
Item
Status
Indicator
Normal
State Description
➊ Diamond Flashing
Green Converter is connected to a compatible product.
Solid
Green Converter is or was receiving control I/O.
Removing or resetting the converter may cause
a fault in the host product.
Off No power or a flash update is in progress.
➋
TX Off No transmitting data.
Flashing
Green Transmitting data.
➌
RX Off Not receiving data.
Flashing
Green Receiving data.
➊
➋
➌