Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. - Manual (Page 38)

5-10 USB Converter User Manual
You are connected to a DMDI drive,
converter Adapter Cfg (04) is set to
“4” (RTU Passthru), and the
diamond status indicator is flashing
red. Power cycle the drive to which the converter
is connected. Then do one of the following:
• HyperTerminal – Connect to the drive
through the converter. Then
simultaneously press the Ctrl and P
keys as your initial command (instead of
Enter).
• V*S Utilites (v4.06 or higher) – Connect
to the drive through the converter.
Table 5.9 – Troubleshooting Potential Problems
Description Action