Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. - Manual (Page 31)

Troubleshooting 5-3
Table 5.3 – RX Status Indicator
Status Cause Corrective Action
Off Converter is not receiving
data. • Verify that data is being
transmitted by the PC.
• Securely connect cables.
• Apply power to the drive.
• Configure the computer
software to use the same port
rate as the converter.
Flashing
Green Converter is receiving data
from the computer. No action required.
Table 5.4 – TX Status Indicator
Status Cause Corrective Action
Off Converter is not transmitting
data. • Verify that data is being
transmitted.
• Securely connect cables.
• Apply power to the drive.
Flashing
Green Converter is transmitting data
to the computer. No action required.