Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. User Manual
Page 25
Advertising
Configuring the Converter
4-7
4.
Click OK to display the Connect To screen (
).
5.
From the “Connect using” pulldown list, select the communications port noted in
Step 1 on
Page 4-5
.
6.
Click OK to display the COM Properties screen (
7.
Select the settings shown in Figure 4.4.
8.
Click OK. A blank HyperTerminal workspace appears.
Important: Select File > Save to save the HyperTerminal configuration that you just
created. In future connections, you can select the saved configuration and
quickly connect to the 1203-USB converter.
Figure 4.3 – Connect To Screen
Figure 4.4 – COM Properties Screen
Advertising