Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. - Manual (Page 63)

Using RTU Master Mode D-7
Re-establish communications between the drives on the RTU Master network and the
computer (via the 1203-USB converter).
1. Apply power to all of the drives on the RTU Master network.
2. In the V*S Utilities application window ( Figure D.5 ), select Explore > Connect >
Serial to Network… to display the Network Connection - Node Selection screen
(
Figure D.6 ).
3. Select the “Multiple” radio button. Then enter the node address for the first
network drive (for this example, “1”), and the node address for the last network
drive (for this example, “2”) to view all drives simultaneously in the V*S Utilities
online window. Click Connect to display the V*S Utilities network menu tree
(
Figure D.7 ).
Figure D.5 – V*S Utilities Full Application Window
Figure D.6 – Network Connection - Node Selection Screen