Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. - Manual (Page 52)

C-6 USB Converter User Manual
9. When the flash update is completed, the message window in the Executing Flash
Update screen changes to indicate that flash update was completed (
Figure C.8 ).
Click Close to exit the Flash Update Completed screen. The Device Firmware
Changed dialog box (
Figure C.10 ) will appear.
10. V*S Utilities will prompt you to reconnect since the device may have changed its
database because of the flash update. Click Yes to reconnect to the device.
Figure C.8 – Executing Flash Update Completed Screen
Figure C.9 – Device Firmware Changed Dialog Box