Metrohm 889 IC Sample Center - Manual (Page 16)

2.2 Opening the device
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 ￭￭￭￭￭￭￭￭
889 IC Sample Center
1
2
3
4
5
Figure 2 889 IC Sample Center - rear
1 USB connector
For the connection to a PC. 2 Fan
For the cooling unit. Do not cover!
3 I/O connector
For output of an inject marker signal. 4 Mains connection socket
With mains switch and fuse holder.
5 Type plate
Contains specifications concerning mains
voltage and serial number.
2.2 Opening the device
Warning
Mobile parts are to be found in the interior of the 889 IC Sample Cen-
ter. Reaching into the interior during operation puts personnel at a seri-
ous risk of injury. Open the door only if the device is in idle mode. Due
to safety considerations, no needle movements are carried out by the
device when the door is open.