4 partial loopfill injection, Partial loopfill injection – Metrohm 889 IC Sample Center User Manual
Page 32
Advertising
4.4 Partial loopfill injection
■■■■■■■■■■■■■■■■■■■■■■
24
■■■■■■■■
889 IC Sample Center
4.4
Partial loopfill injection
The switchover sequence for the partial loopfill injection is as follows:
1 Initial situation
The injection valve is in INJECT position. The sample needle pene-
trates the vial with the air needle. An overpressure channeled in
through the air needle ensures that no air or steam bubbles form
during the aspiration of the sample.
2 Rinsing the aspirating line
Advertising