Metrohm 889 IC Sample Center - Manual (Page 33)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Functioning
889 IC Sample Center
￭￭￭￭￭￭￭￭ 25
The syringe aspirates a rinsing volume of sample solution out of the
sample vial and fills the sample line with sample. The rinsing liquid is
expelled.
3 Switching the injection valve to LOAD
The injection valve is switched over to the LOAD position. This cau-
ses an homogenous sample plug to be present at the inlet to the
sample loop.
4 Filling the sample loop partially
The programmed injection volume is now aspirated into the sample
loop.