2 replacing the sample needle, Replacing the sample needle, Figure 14 – Metrohm 889 IC Sample Center User Manual
Page 41
Advertising
■■■■■■■■■■■■■■■■■■■■■■
5 Handling and maintenance
889 IC Sample Center
■■■■■■■■
33
5.3.2
Replacing the sample needle
Figure 14
Replacing the sample needle
Replace the sample needle as follows:
1 Open the Manual control in MagIC Net
™ .
2 Under device selection, 889 IC Sample Center, select the tab Nee-
dle. Under Position/Input, select Exchange position and click on
[Start].
Now a message window is displayed.
3 Remove the sample rack and click on [OK].
Advertising