Metrohm 850 Professional IC Anion MSM-HC - LP-Gradient - Manual (Page 26)

3.4 Installation diagram
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭
850 Professional IC Anion MSM-HC LP Gradient
￭ Equip two 6.1834.080 eluent aspiration tubings (see "Assembling
eluent aspiration tubing", page 29) and screw them tight to the
eluent degasser inputs B and C in the low pressure gradient (see
"Connecting the eluent degasser", page 34).
3.4 Installation diagram
Figure Installation diagram3 shows the capillary connections with the
application of a low pressure gradient with three solutions.
The arrangement of the modules in the diagram corresponds to the front
view of the instrument. Liquid containers (eluent bottle, sample vessel,
waste container, auxiliary solutions container) and guard column (see
Chapter 3.21, Page 61) are not shown in the diagram.
Most of the capillaries are already pre-installed at the time the instrument
is delivered. Capillaries on which nothing needs to be done at the time of
initial installation are not numbered in the diagram.