Figure 29, Msm-hc – connectors – Metrohm 850 Professional IC Anion MSM-HC - LP-Gradient User Manual
Page 63
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC Anion MSM-HC LP Gradient
￭￭￭￭￭￭￭￭
53
1
3
2
3
4
5
6
7
8
2
1
Figure 29
MSM-HC – Connectors
1
Union nut
2
MSM-HC connecting piece 6.2835.010
3
Eluent inlet capillary
Labeled with in.
4
Eluent outlet capillary
Labeled with out.
5
Rinsing solution inlet capillary
Labeled with rinsing solution.
6
Rinsing solution outlet capillary
Labeled with waste rins..
7
Regeneration solution outlet capillary
Labeled with waste reg..
8
Regeneration solution inlet capillary
Labeled with regenerant.
The PTFE capillaries firmly mounted on the MSM-HC are connected to the
other components of the IC system as follows:
Caution
As the PTFE capillaries are very soft, the pressure screws should not be
overtightened.
Flattened capillaries can be shortened with the help of a capillary cutter.