Figure 19, Connecting eluent connection tubings – Metrohm 850 Professional IC Anion MSM-HC - LP-Gradient User Manual
Page 48
3.11 Low pressure gradient
■■■■■■■■■■■■■■■■■■■■■■
38
■■■■■■■■
850 Professional IC Anion MSM-HC LP Gradient
Connecting connection tubings
Note
The connection tubings to the inputs B and C are already installed at
the time the instrument is delivered. Only connector A still needs to be
connected.
4
5
1
2
4
5
4
5
3
6
Figure 19
Connecting eluent connection tubings
1
Connection tubing eluent degasser –
mixing valve (6.1834.120)
2
Connection tubing eluent degasser –
mixing valve (6.1834.100)
Pre-installed.
3
Connection tubing eluent degasser –
mixing valve (6.1834.110)
Pre-installed.
4
Backup ring
5
Clamping screw
6
Mixing coil for low pressure gradients
6.2758.020
1
■
Plug the connection tubing (19-1) into eluent inlet A and fix in
place with the backup ring (19-4).
■
Carefully tighten the clamping screw (19-5) with 6.2621.050
wrench.
2 Repeat Step 1 with the other two eluent connection tubings (19-2)
and (19-3).