3 basic settings – Metrohm 790 Personal IC User Manual
Page 31
2 Installation
790 Personal IC
22
2.5.3 Basic
settings
When the program is started for the first time several basic settings
must be made for the 790 Personal IC. Proceed as follows:
1 Start program
• Double-click the software icon to start the program. The
program window with the opening picture is opened and the
Log In window appears on the screen:
• Do not enter any password here, just click on
<Log In>
. The
following window appears:
• Enter company, division and name and click on
<OK>
. This
window appears only one time after software installation.
2 COM port settings
This step must only be carried out if a different COM interface
from COM1 or COM2 is used for connection to the 790 Personal
IC.
• Click on
Options / 790 Personal IC:COM1
to open the
Links
window: