Metrohm 790 Personal IC - Manual (Page 61)

3 Operating tutorial
790 Personal IC
52
3.2 Preparations
Before you start this brief tutorial, the entire IC system must be correctly
installed as described in section 2. In what follows, the most important
points for the installation are described once again (for details, see the
sections mentioned).
1 Install 790 Personal IC
⇒ Setting up instrument section 2.2
⇒ Installing and connecting detector block section 2.3.1
⇒ Mounting syringe and aspirating tubing section 2.3.2
⇒ Mains connection section 2.4
⇒ Connection to PC section 2.5
2 Prepare eluent
⇒ Preparing eluent:
4 mmol/L tartaric acid / 1 mmol/L
dipicolinic acid in dist. H
2
O
⇒ Microfiltering and degassing eluent section 5.1.3
3 Install high-pressure pump
⇒ Removing transport security screws section 2.6.1
⇒ Mounting pulsation dampener (option) section 2.6.2
⇒ Installing eluent supply section 2.6.3
⇒ Degassing pump section 2.6.4
4 Connecting separating column and suppressor
⇒ Connecting IC cation column section 2.7.7
⇒ Conditioning system section 2.9.1